GOAT MILK & HONEY COLD PROCESS SOAP

GOAT MILK & HONEY COLD PROCESS SOAP

A creamy, traditional handmade soap made with olive pomace oil, ordinary coconut oil, palm oil, castor oil, goat milk and honey.
This cold-process soap combines four carefully selected oils to create a firm bar with a creamy, bubbly lather.
Batch size: 1 kg oils
Superfat: 5%
Sodium hydroxide purity: 99%
Method: Cold process
Curing time: 4–6 weeks
—

1. INGREDIENTS

Oil phase
Ingredient| Quantity
Castor oil| 100 g
Ordinary coconut oil| 250 g
Olive pomace oil| 400 g
Palm oil| 250 g
TOTAL OILS| 1,000 g
Lye and liquid phase
Ingredient| Quantity
Sodium hydroxide (99% purity)| 142.12 g
Distilled water| 250 g
Chilled goat milk| 50 g
Additional ingredient
Ingredient| Quantity
Pure honey| 20 g
Calculation note: The 142.12 g sodium hydroxide quantity is the purity-adjusted version of the previously used 140.70 g pure-NaOH calculation. The final formula must be verified against the actual SAP values of the oils before production.
—

2. WHERE TO BUY YOUR INGREDIENTS

Shop your soap-making ingredients at Fun with Soap.
Castor Oil – 100 g
Ordinary Coconut Oil – 250 g
Please select ordinary coconut oil, not fractionated coconut oil.
Olive Pomace Oil – 400 g
Palm Oil – 250 g
Sodium Hydroxide (Caustic Soda)
Find sodium hydroxide under our Speciality Chemicals category:
Distilled Water
Goat milk and pure honey can be purchased from your local food supplier.
Visit our online store:
—
3. EQUIPMENT REQUIRED
– Accurate digital weighing scale
– Stainless steel or suitable lye-resistant containers
– Heat-resistant jug
– Stainless steel spoon or silicone spatula
– Stick blender
– Digital thermometer
– Silicone soap mould
– Silicone scraper
– Safety goggles
– Chemical-resistant gloves
– Protective apron
– Long-sleeved clothing
Never use aluminium equipment when working with sodium hydroxide.
—
4. IMPORTANT SAFETY PRECAUTIONS
Sodium hydroxide is a highly caustic chemical. It can cause serious skin burns and permanent eye damage.
Before starting:
1. Work in a well-ventilated area.
2. Wear safety goggles, chemical-resistant gloves and protective clothing.
3. Keep children and pets away from your working area.
4. Never use aluminium containers or utensils.
5. Always add sodium hydroxide to water, never water to sodium hydroxide.
6. Avoid breathing the fumes produced when dissolving sodium hydroxide.
7. Never leave the lye solution unattended.
8. Keep all ingredients and equipment organised before starting.
Emergency precautions
Skin contact: Immediately rinse with plenty of cool running water for at least 15–20 minutes. Remove contaminated clothing.
Eye contact: Flush continuously with clean running water for at least 15–20 minutes and seek urgent medical attention.
Ingestion: Seek emergency medical assistance immediately. Do not induce vomiting.
Never attempt to neutralise sodium hydroxide on your skin with vinegar.
—
5. STEP-BY-STEP SOAP-MAKING INSTRUCTIONS
STEP 1: Prepare the goat milk
Measure 50 g of goat milk.
Place it in the refrigerator or freezer until very cold or partially frozen.
Keeping the goat milk cold helps prevent overheating and discolouration during soap making.
STEP 2: Prepare the oils
Weigh:
– 100 g castor oil
– 250 g ordinary coconut oil
– 400 g olive pomace oil
– 250 g palm oil
Place the coconut oil and palm oil into a suitable stainless steel container.
Gently heat until completely melted.
Add the olive pomace oil and castor oil.
Stir thoroughly until all the oils are evenly combined.
Allow the oil mixture to cool to approximately 30–35°C.
STEP 3: Prepare the lye solution
Carefully weigh 250 g distilled water into a suitable heat-resistant container.
In a separate container, weigh the sodium hydroxide.
Slowly sprinkle the sodium hydroxide into the distilled water while stirring carefully.
Never pour water onto dry sodium hydroxide.
Continue stirring until all the sodium hydroxide has dissolved.
The solution will become hot. Allow it to cool in a safe, ventilated area.
Wear protective equipment throughout this process.
STEP 4: Prepare the honey
Measure 20 g pure honey.
Set aside until needed.
Honey can be incorporated at light trace.
STEP 5: Combine the goat milk and oils
Once the oils have cooled, slowly add the chilled goat milk to the oil mixture.
Stir gently until evenly incorporated.
Keep the mixture cool to help prevent overheating and milk discolouration.
STEP 6: Combine the lye solution and oils
Check that the oil mixture and lye solution have cooled to approximately 30–35°C.
Slowly pour the lye solution into the oils while stirring carefully.
Use a stick blender in short bursts, alternating with hand stirring.
Continue until the mixture reaches light trace.
Light trace means the soap batter has thickened slightly and leaves a faint trail on the surface.
STEP 7: Add the honey
Add the 20 g honey to the soap batter at light trace.
Stir gently until evenly incorporated.
Avoid excessive blending.
Honey contains natural sugars that can increase heat during saponification.
STEP 8: Pour into the mould
Pour the soap batter into your prepared silicone mould.
Tap the mould gently against the work surface to release trapped air bubbles.
Do not heavily insulate the mould.
Goat milk and honey soaps can generate additional heat during saponification.
Place the mould in a cool location and monitor it for signs of overheating.
STEP 9: Unmould and cut
Allow the soap to harden.
Depending on the formulation and temperature, this may take approximately 24–72 hours.
Once firm enough, carefully remove the soap from the mould.
Cut into individual bars.
Wear gloves when handling freshly unmoulded soap.
STEP 10: Cure your soap
Arrange the soap bars on a curing rack with sufficient space between them.
Allow the soap to cure for 4–6 weeks in a cool, dry, well-ventilated area.
Turn the bars occasionally to encourage even drying.
The curing period allows excess water to evaporate and the bars to become firmer and longer-lasting.
—
6. TIPS FOR SUCCESS
Preventing goat milk discolouration
Keep the goat milk chilled and avoid excessive heat during processing.
Preventing honey overheating
Honey contains natural sugars that can cause the soap to heat up during saponification. Avoid heavy insulation.
Achieving a smooth texture
Use your stick blender in short bursts. Over-blending can cause the batter to become too thick to pour easily.
Creating beautiful soap bars
Leave the soap in its natural creamy colour or add a suitable soap colourant.
Testing your finished soap
Check the finished bars for consistency, appearance and hardness. A pH reading alone cannot establish that soap is free from excess caustic alkali.
—
7. STORAGE
Store fully cured soap in a cool, dry location away from direct sunlight and excessive humidity.
Use suitable breathable soap packaging.
—
8. THE FINISHED PRODUCT
Your Goat Milk & Honey Cold Process Soap should have:
– A beautiful creamy appearance.
– A firm, long-lasting bar after curing.
– A rich, creamy lather.
– A natural honey-coloured finish.
Goat milk and honey make a lovely addition to traditional handmade soap.
Enjoy making your own beautiful handmade soaps!
—
FUN WITH SOAP
Making soap, skincare and bath products is easier when you have the right ingredients and guidance.
Visit our online store for soap-making supplies and inspiration:

Leave a Reply

Your email address will not be published. Required fields are marked *